Cart 0
Can-Fan RK 200 Inline Fan 820 m³/h

Can-Fan RK 200 Inline Fan 820 m³/h

Can-Fan RK 200 centrifugal inline fan with a 200 mm connection and 820 m³/h airflow for powerful air extraction and intake in ventilation systems.

  • Can-Fan
  • Model: 41.005
  • EAN: 8718836152085
€ 109.95
Premium quality
PREMIUM
QUALITY
Secure payment
SECURE
PAYMENT
Quality shipping
QUALITY
SHIPPING
Well packaged
WELL
PACKAGED

The largest plastic RK, with a 200 mm flange, 820 m³/h and a power draw of 100 W.

The RK 200 is where this range ends. Anyone needing more does not arrive at a bigger RK but at a different kind of fan, and that is a deliberate limit on the manufacturer's part.

Where the plastic range stops

Above this point Can moves to diagonal fans in metal housings, where an impeller and a stator work together to send air straight and evenly down the duct. Those are more efficient and quieter against high back pressure, but also dearer and heavier.

That makes the RK 200 the cheapest way to reach a good eight hundred cubic metres per hour, as long as your system stays simple. With short runs, few bends and one filter, this fan is exactly enough. Start stacking things up, so long runs, several bends, a silencer and a filter at once, and a diagonal fan handles that back pressure better.

Note too that the step from the 160L to this model is small: 780 against 820 m³/h. What you are mainly buying here is the wider connection rather than much more air.

Hanging and supporting it

At 3.2 kg this is not a heavy device, but it rarely hangs alone. Reckon on the whole assembly: the fan, 200 mm ducting and a carbon filter matched to this airflow easily come to several times that between them, and all of it often hangs from the same frame.

So support the filter separately rather than letting it hang off the fan's flange. A length of ducting between the two also absorbs vibration that would otherwise travel through the housing into the frame.

Technical Specifications:

  • Flange size: 200 mm
  • Free air delivery: 820 m³/h
  • Airflow at 100 Pa back pressure: 655 m³/h
  • Power draw: 100 W
  • Current: 0.5 A
  • Weight: 3.2 kg
  • Speed control: allowed
  • Material: plastic
  • Matching filters per Can: CAN-Lite 800, CAN 350 BFT, CAN 366 BFT

Frequently asked questions

Why does it barely deliver more than the 160L?
Because the range reaches its ceiling here. The gain is in the wider connection and the lower air speed, not in the number of cubic metres.

What if I need more?
Then you arrive at the diagonal fans in metal housings, which perform better against high back pressure.

Which filter belongs with it?
The same ones Can names for the 150L and 160L: CAN-Lite 800, or CAN 350 or 366 BFT.

May I turn it down to a lower speed?
Yes, a controller is permitted on the RK.

Trusted by growers
across Europe
Wide range
Top brands
For the small scale homegrower