AC Infinity Advance Grow Tent System 120x60x180 cm

Complete grow kit built around the CLOUDLAB 642 at 120 × 60 × 180 cm, with a CONTROLLER AI+, IONBOARD S24 grow light, CLOUDLINE A6 150 mm inline fan, carbon filter, CLOUDRAY S6 clip fan and four fabric pots.

The pot count is the honest answer to "how many plants"

Grow tents are sold on square metres, but almost nobody thinks in square metres. The question is how many plants fit, and manufacturers rarely give a usable answer, because it depends on your pot size and whether you keep the plants short.

These kits solve it differently. AC Infinity includes the number of pots the kit is rated for, and those pots have a fixed size: 19 litres. That makes the number checkable rather than an estimate.

This kit contains four pots. The series scales with floor area: two on the 60 × 60, four here, six on the 90 × 90 and eight on the 120 × 120. That is not a marketing figure, it is the contents of the box.

Why 19 litres matters: pot size governs how long a plant can keep growing before roots fill the container, and how often you water. A smaller pot dries out faster, which under a light in a tent can happen within a day. Four 19 litre pots on 0.72 m² means placing them almost edge to edge, so expect a closed canopy and plan your pruning around that.

If you want more, smaller plants, your own pots will do that perfectly well. The 60 × 120 cm trellis net supplied here in fact suits a different approach: you guide the tops through the mesh and hold a flat canopy at one height under the light.

The controller in this box

This kit contains the CONTROLLER AI+, with eight ports. This page previously ran two names together as though the Controller AI+ and the Controller 69 Pro were one device. They are not: they are two different products, and we sell both separately.

The inline fan, the light and the clip fan each connect to the controller with a UIS control cable. The probe hangs among your plants; the controller itself belongs on the mounting plate on the outside of the tent.

The components

The IONBOARD S24 is rated for a 60 × 120 cm area. The CLOUDLINE A6 is a 150 mm inline fan with an EC motor, with a 150 mm carbon filter and 2.4 metres of ducting. Alongside its 100 and 150 mm ports the CLOUDLAB 642 also carries one 200 mm port, so you can move to heavier extraction later without replacing the tent.

Technical Specifications:

• Grow tent: CLOUDLAB 642, 120 × 60 × 180 cm, 2000D oxford
• Growing area: 0.72 m²
• Controller: CONTROLLER AI+, 8 ports, wifi and bluetooth
• Grow light: IONBOARD S24, 60 × 120 cm coverage
• Inline fan: CLOUDLINE A6, 150 mm, EC motor
• Filter: inline carbon filter 150 mm, with prefilter cloth
• Circulation: CLOUDRAY S6 clip fan, oscillating
• Fabric pots: 4 of 19 litres
• Trellis netting: 60 × 120 cm
• Ducting: 150 mm, 2.4 metres, with two clamps
• Also included: probe, pruning snips, aluminium tape, cable ties, plant ties, hanging straps and rope hangers
• Shipping weight: 35 kg
• Product code: AC-PKB24

Frequently asked questions

Do I have to use the supplied pots?
No. They show what the kit is rated for, but your own pots will let you lay it out differently.

Which controller is included?
The CONTROLLER AI+ with eight ports. Not the Controller 69 Pro, which is a different device.

Can I fit a larger fan later?
Yes. This tent has one 200 mm port alongside the smaller ones, so you can scale up without replacing the tent.