AC Infinity - CLOUDLAB 743D 2-in-1 Advance Grow Tent 120 × 90 × 180 cm

A grow tent of 120 × 90 × 180 cm with a removable divider. With the wall in you have two separate chambers, with it out one space of 120 × 90 cm. For four plants, or six split across two chambers.

The divider is the whole point, and it comes out

What sets this tent apart from an ordinary 120 × 90 is a removable wall with its own drip tray, splitting the space into two chambers.

That lets you run two growth phases at once: plants in the vegetative phase in the large chamber, seedlings or cuttings in the small one. That is what makes a continuous harvest possible, because the next batch is always standing ready when you cut.

And if you do not want that, take the wall and the tray out and you are left with one 120 × 90 cm space. So you are not buying away your flexibility: the tent can simply be a large tent.

Bear in mind that two chambers means two lighting regimes, so two lights and two schedules. The tent makes it possible; it does not supply the second light.

Frame and load capacity

Ø 22 mm steel tubing with a metallic finish, where most grow tents use 18 mm. AC Infinity publishes 113 kg as the beam weight capacity, the same figure as across the rest of the CLOUDLAB range.

There are two hanging bars plus one extra. That extra bar is a hanging bar and not a roof beam, and the distinction matters more here than in a single-chamber tent: with two chambers you are quicker to hang a second light from the nearest available tube. Hang lights and filters from the roof beams.

Canvas, zips and light-tightness

The outer canvas is 2000D oxford, woven denser than the usual 600D, with a diamond mylar interior that scatters light rather than bouncing it back like a mirror.

The zips are SBS with a cover flap and an inner seam behind them. On a two-chamber tent light-tightness counts double: if the small chamber has a dark period while the large one is still lit, every leak is a problem. So check the wall itself and the cable passthrough too.

The lightproof cable passthrough and the controller plate exist precisely for that: cables out without making a hole that light comes through.

What else is included

• A waterproof floor tray for the whole tent.
• A removable drip tray for the second chamber.
• A detachable tool bag.
• Duct ports of 100, 150 and 200 mm.
• An extra hanging bar alongside the two fixed ones.

Technical Specifications:

• Model: AC-CBD743
• Dimensions: 120 × 90 × 180 cm
• Growing area: 120 × 90 cm as a single chamber
• Layout: one or two chambers, wall removable
• Plant capacity: 4 as one chamber, up to 6 using the second
• Frame: Ø 22 mm steel, metallic finish
• Beam weight capacity: 113 kg
• Hanging bars: 2, plus 1 extra
• Outer canvas: 2000D oxford
• Interior: diamond mylar
• Duct ports: 100 mm, 150 mm and 200 mm
• Zips: SBS with lightproof cover flap
• Included: floor tray, second-chamber drip tray, tool bag, controller plate with cable passthrough

Frequently asked questions

Can I use the tent as one large space?
Yes. The divider and its drip tray are fully removable, leaving 120 × 90 cm.

Do I need two lights?
If you use both chambers at once, yes, because two growth phases means two lighting schedules. The tent supplies no lighting.

How much may I hang?
113 kg from the roof beams. The extra hanging bar is not a roof beam and is not meant for a light or heavy ventilation.

How many plants fit?
Four as a single chamber, and up to six when you use the second chamber for young plants.

Does light leak between the two chambers?
The tent is built against that, with SBS zips, cover flaps and a lightproof cable passthrough. With differing light schedules, do check the wall and the passthrough.