Secret Jardin PatchIT7 Repair Set 100 mm

Repair set of 100 mm with two self-adhesive patches, sized for the opening of a CF7 cable port. The smallest of the three PatchIT sizes.

The port you move most often

Of all the openings in a grow tent, the cable port is the one most often in the wrong place. That makes sense: you cut it on day one, when you do not yet know where your power strip will stand, where the timer will hang, or that you will want to add a sensor later.

Air ports are more or less settled once your fan is positioned. Cables move with every device you add, and after a few changes there is a lead running diagonally across your tent to a hole on the wrong side.

This set makes that reversible. You cut a new port where you want it now, and stick the old hole shut: done, lightproof, and no longer visible.

The size is matched to the CF7 port, with enough overlap all round to bond onto intact fabric rather than onto the edge of the cut.

Technical Specifications:

• Diameter: 100 mm
• For openings made by: CF7 cable flange
• Contents: 1 black patch for the outside, 1 reflective patch for the inside
• Material: reflective mylar, self-adhesive
• Larger sizes: PatchIT16 at 220 mm, PatchIT25 at 350 mm
• Revision: R4.00

Frequently asked questions

Can I close a DF16 hole with this?
No, that is too large. Use the 220 mm PatchIT16 for that.

Does it work on a tear?
Yes, as long as the tear fits within 100 mm and there is intact fabric all round to bond to.

Do I have to use both patches?
Yes. One patch on one side is not lightproof and leaves the adhesive edge exposed.